Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop
Sale

Ansmann ENERGY 16 PLUS Charger for AAA, AA, C, D and 9V E NiMH or NiCd Batteries

Original price was: $371.00.Current price is: $98.00.

(In Stock)

SKU: VC84643807170 Category:
  • Charges 1-12 AAA/AA, 1-6 C/D or 1-2 9V E
  • Charges NiMH, NiCd Cells Simultaneously
  • Dual USB Charging Ports
  • Microprocessor-Controlled Charging
  • Automatic Refresh Function
  • Auto Switch to Trickle Charge
  • Reverse Polarity Protection
  • Quick Capacity Test, LED Indicator
  • 100-240VAC Power for Worldwide Use
  • 60-1000mA Per Cell, Varies by Type

The ENERGY 16 PLUS Charger from Ansmann is compatible with AAA, AA, C, D and 9V E NiMH and NiCd batteries. It can even charge NiMH and NiCd cells simultaneously. It is capable of handling 1-12 AAA or AA, 1-6 C or D, or 1-2 9V E batteries. Charging is controlled by a microprocessor and charging status is monitored and available on the LED indicators. Additionally, the ENERGY 16 PLUS features dual USB ports to enable you to charge your smartphone or other mobile device.

Your batteries will benefit from an automatic refresh function, as well as automatic switching to trickle charging to prevent self-discharge when they are left in the unit. Reverse polarity protection safeguards the batteries and charger against damage when batteries are installed incorrectly. A quick capacity test can be performed on each battery, too, with results reported about 10 sec after battery insertion.

The charger runs on 100-240VAC power for worldwide use, and includes a 6′ power cord. Depending upon battery size, it will supply 60-1000mA of current per cell.

Compatible with AAA, AA, C, D and 9V E NiMH and NiCd batteries Will charge NiMH and NiCd cells simultaneously Capable of handling 1-12 AAA or AA, 1-6 C or D, or 1-2 9V E batteries. Charging begins automatically as soon as contact with the battery is made Charging is controlled by a Delta-V microprocessor, and charging status of each battery is individually monitored and available on the LED indicators. The charger detects the difference between the charging voltage and the charge in the batteries, and stops charging when the batteries are full, in order to prevent overcharging. Current is adjusted automatically LED flashes green in pre-charging mode, red and green in refresh mode, and red when a faulty battery or alkaline cell is detected. A constant red LED indicates fast charge mode, while a constant green one means a battery is fully charged and trickle charging is in progress Dual USB ports allow you to charge the majority of USB-powered devices, including smartphones Features an automatic refresh function and performs automatic switching to trickle charging to prevent self-discharge when batteries are left in charger Reverse polarity protection safeguards the batteries and charger against damage when batteries are installed incorrectly Faulty cell and alkaline battery detection ensure that the charger does not attempt to charge bad or non-rechargeable batteries Quick capacity test can be performed on each battery, too, with results reported about 10 sec after battery insertion. The LED indicators display the following colors: green for over 80% of the nominal capacity, orange for 25-80%, and red for under 25% Automatic diagnosis of inserted cells prompts charger to begin pre-charging or refreshing, if needed, prior to the regular fast charging process Runs on 100-240VAC power for worldwide use. Depending upon battery size, it will supply 60-1000mA of current per cell

Configuration 1-12 AAA/AA, 1-6 C/D, or 1-2 9V E
Battery Type NiMH, NiCd
Input Power 100-240 VAC, 50-60 Hz
Output Power Voltage: 1.5-10.2 VDC based on battery
Charging current:
D: 6x 1000 mA
C: 6x 1000 mA
AA: 12x 1000 mA
AAA: 12x 400 mA
9V E block: 2x 60 mA
USB: 2x 5.0 VDC, 1000 mA
Charging Time AA 1000mAh: Approx. 1.2 hr
Interface 2x USB ports for charging devices
Indicator Lights LEDs for charging status
Operating Temperature Not specified by manufacturer
Connector 2-prong US plug
Dimensions 10 x 9.75 x 3.9″ / 25.4 x 24.8 x 9.9 cm
Packaging Info
Package Weight 3.95 lb
Box Dimensions (LxWxH) 13.5 x 11.3 x 2.0″

In the Box Ansmann ENERGY 16 PLUS Charger for AAA, AA, C, D and 9V E NiMH or NiCd Batteries

  • Power Cord – 6.0′ / 1.8 m
  • Limited 3-Year Warranty

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Reviews

There are no reviews yet.

Be the first to review “Ansmann ENERGY 16 PLUS Charger for AAA, AA, C, D and 9V E NiMH or NiCd Batteries”

Your email address will not be published. Required fields are marked *

Cart

Your Cart is Empty

Back To Shop